| NES WORLD Forum | |
|
https://www.nesworld.com/cgi-bin/yabb/YaBB.pl
General Video Gaming >> Homebrew >> NROM replacement https://www.nesworld.com/cgi-bin/yabb/YaBB.pl?num=1157292748 Message started by downloader on 03. Sep 2006 at 15:12 |
|
|
Title: NROM replacement Post by downloader on 03. Sep 2006 at 15:12
Hey dudes! I just opened a Gyromite cart to see if it had a converter in there...but I wasn't lucky.
After it was opened and I saw NROM standing on the board...I started thinking "why not desolder the PRG rom and replace it with an EPROM with a game on there. Now I was wondering if some modification needed to be done. Some rewire-ing or such. Since the Eprom I'm gonna use is 32 pins, my guess is I have to do that. Can anyone help me a little? Let's start by finding out what games I can put on there. I allready have Mario Bros so don't say that :P I was looking at Megaman, but I'm not sure if that's suitable. Then I was thinking Mach Rider cause I know that one can be put on there. But now I have to know what pin of the ROM goes to what hole on the board. |
|
Title: Re: NROM replacement Post by coinheaven on 14. Sep 2006 at 12:32
mach rider would work. it would be a hell of a lot easier if you just bought 28 pin roms for that project, no wiring involved.
|
|
Title: Re: NROM replacement Post by downloader on 08. Oct 2006 at 23:45
well dudes this is finally gonna work!!!
I got all the info I need and all the stuff I need :D this is so gonna rock!! |
|
NES WORLD Forum » Powered by YaBB 2.5.2! YaBB Forum Software © 2000-2022. All Rights Reserved. |