NES WORLD Forum - Print Page

NES WORLD Forum
https://www.nesworld.com/cgi-bin/yabb/YaBB.pl System Specific Boards >> Nintendo Entertainment System >> M machines and Dizzy wont work, just blink https://www.nesworld.com/cgi-bin/yabb/YaBB.pl?num=1224797507 Message started by scampo77 on 23. Oct 2008 at 22:31

Title: M machines and Dizzy wont work, just blink
Post by scampo77 on 23. Oct 2008 at 22:31

i have 2 gold cartridges from camerica / code masters. the games are micro machines and adventures of dizzy. they wont work in my console. they both give the same symptom as a bad 72 pin connector except the games actually start and not just blink grey. both these games have a switch on the back A or B but it doesnt make a difference. this console works perfectly with all other games and these arent the aladin cartridges. any ideas?

Title: Re: M machines and Dizzy wont work, just blink
Post by Dutch nes gamer on 23. Oct 2008 at 22:49

If you put a game in your console that is not of your region the game will give a screen for 1 or 2 seconds and then reset over and over.
Thit is the work of the lock out chip.

Check the main page of nesworld -development-other for all the info you need.

Title: Re: M machines and Dizzy wont work, just blink
Post by scampo77 on 24. Oct 2008 at 01:23

i cant find anything on removing or bypassing this do you have a link?

Title: Re: M machines and Dizzy wont work, just blink
Post by scampo77 on 24. Oct 2008 at 01:50

its ok i found something on youtube its here if anyone else needs it. thanks everyone http://www.youtube.com/watch?v=x16Oecw49GA

Title: Re: M machines and Dizzy wont work, just blink
Post by NESaholic on 24. Oct 2008 at 14:12

We have a file on nesworld also, only thing you had to do is run a search. ;) Anways this babe rocks!