NES WORLD Forum - Print Page

NES WORLD Forum
https://www.nesworld.com/cgi-bin/yabb/YaBB.pl System Specific Boards >> Nintendo Entertainment System >> nes wont work after mod https://www.nesworld.com/cgi-bin/yabb/YaBB.pl?num=1306719690 Message started by greg1186 on 30. May 2011 at 02:41

Title: nes wont work after mod
Post by greg1186 on 30. May 2011 at 02:41

i modded my nes cause i was bored i put in a color changing led and replaced the 72 pin connector, it worked great for a day and then all the sudden does not work.. the power comes on and the led works but nothing shows up on the screen not even a strange blinking color.... any help?

Title: Re: nes wont work after mod
Post by albailey on 31. May 2011 at 13:48

Have you tried using RF cable and AV cables?

It is possible the RF might be bad. If it is bad then the AV (red and yellow) cables should still work (I think).

Al