Welcome, Guest. Please Login or Register
 To the NESWORLD news page
   
 
  HomeHelpSearchLoginRegisterAwards  
 
  NES WORLD Forum › System Specific Boards › Nintendo Entertainment System › adjusting the connectors?
(Moderator: Martin)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
adjusting the connectors? (Read 2298 times)
Cory
Forum Newbie
*

Offline



NESWORLD KICKS ASS!

Posts: 19
Illinois

Gender: male
adjusting the connectors?
10. Jan 2007 at 22:16  
hey is there any way to get the connectors closer, and farther apart, i have 2 nintendos and one of them works REALLY good but its  really hard to get the games out, and one had the problem where u have to have somethin holding the game down for it to work, any ideas? thanks guys!
Back to top
 
...
ffairladyzz ffairladyzz  
IP Logged
 
jajaja
God Member
*****

Offline




Posts: 1159
Re: adjusting the connectors?
Reply #1 - 10. Jan 2007 at 23:46  
I would also like to know this. I've used the needle method where i bend the pins up, but its rather lousy. It usualy takes many tries before you get it to work, atleast for me.
Back to top
 
 
IP Logged
 
ThaDuke
Junior Member
**

Offline



Tanooki Suit Dookie!

Posts: 90
Florence, AL

Gender: male
Re: adjusting the connectors?
Reply #2 - 11. Jan 2007 at 04:48  
Cory wrote on 10. Jan 2007 at 22:16:
hey is there any way to get the connectors closer, and farther apart, i have 2 nintendos and one of them works REALLY good but its  really hard to get the games out, and one had the problem where u have to have somethin holding the game down for it to work, any ideas? thanks guys!


Well, by pushing the connector pins together it will be hard to pull the games back out. I think it's worth doing though..
Back to top
 
...
 
IP Logged
 
jajaja
God Member
*****

Offline




Posts: 1159
Re: adjusting the connectors?
Reply #3 - 11. Jan 2007 at 18:58  
ThaDuke wrote on 11. Jan 2007 at 04:48:
Cory wrote on 10. Jan 2007 at 22:16:
hey is there any way to get the connectors closer, and farther apart, i have 2 nintendos and one of them works REALLY good but its  really hard to get the games out, and one had the problem where u have to have somethin holding the game down for it to work, any ideas? thanks guys!


Well, by pushing the connector pins together it will be hard to pull the games back out. I think it's worth doing though..


Also worth mentioning is that pushing them too far up might result that it wont work. I did it myself. The game sat very tight when i inserted it, you would think the contact between the game and the connector would be super, but for some reason i only got blinking screen :\
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

NES WORLD Forum » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2022. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge